Terraplus is deemed an essential business in Ontario based on the updated guidance provided on April 3, 2020 and remains open as we continue to support and serve our customers during this challenging time. Our sales, rentals, and support departments are operational but working with a reduced staff while others work from home.
The best way to contact us during this time is through our Contact page or via email at the following:
For sales and rentals – [email protected]
For technical support – [email protected]
For shipping and receiving – [email protected]
For accounting – [email protected]
Safeguarding the health and wellbeing of our employees, customers, and suppliers is our top priority. We are continuing to monitor and follow the guidelines and requirements from Government Public Health Authorities and will adjust and review as new information is made available.
Please note that Terraplus has relocated to a larger facility just down the road at 120 West Beaver Creek Road, Unit #15 in Richmond Hill, Ontario (L4B 1L2). All equipment should now be sent to our new location.
We are pleased to announce that curved sensors for measuring drill core are now available for the KT-20 Physical Property Measuring System. The curved sensors offer the highest sensitivity for measuring magnetic susceptibility or conductivity, while producing consistent, repeatable measurements. The curved sensors are available in dedicated sizes for BQ, NQ, HQ and PQ core diameters, in frequencies of 10 kHz or 100 kHz.
Terraplus is pleased to introduce the KT-10H Magnetic Susceptibility Meter and KT-10H S/C Magnetic Susceptibility/Conductivity Meter. The KT-10H and KT-10H S/C include the same benefits as the other KT-10 models, but have higher sensitivities for measuring magnetic susceptibility (10-7 SI units). The KT-10H and KT-10H S/C are only available with circular coils.
We have added a Distributed System for IP surveys to our rental pool. The system consists of 20 V Full Waver two channel receivers (40 simultaneous channels), one I Full Waver single-channel recorder to log the electrical current from the transmitter, Full Waver Designer software to design the survey grid, and Full Waver Viewer processing software. The distributed system is geometry free, allowing the operator to deploy the autonomous receivers anywhere in the grid. The receivers remain stationary while the transmitter is moved through and around the grid, which enables the operator to collect true 3D data. The system is compatible with most IP transmitters, including the Tipix and VIP series.
We are pleased to introduce the RS-330 Portable Gamma-Ray Spectrometer for radiological, geophysical, environmental and engineering applications. The RS-330 is available with NaI, BGO or LaBr detector options, in 3″x3″ or 2″x2″ sizes. The 2″x2″ detector sizes are available with a collimator to localize measurements.
We have added a QL40-FTC-B Fluid Temperature/Conductivity Probe to our rental pool. The QL40-FTC-B can be used for a number of applications, including salinity, salt-water intrusion studies, and water-well monitoring. This QL probe is a bottom sub, and can be used in combination with any inline quick link probe.